Sale!

DIY Portable 12V Battery Energ

Name: DIY Portable 12V Battery Energy Storage V3 Spot Welding Machine PCB Circuit Board 18650 Lipo Batteries Parts for RC Aircraft Car
SKU: 32836588140
Availability: InStock

$17.68 – $39.88

SKU: 32836588140 Category: Vehicles & Parts

DIY Portable 12V Battery Energy Storage Spot Welding PCB Circuit Board 18650 Lipo Batteries Spare Parts for RC Aircraft Car

Battery energy storage high current spot welding machine main board

7-12V power supply

Support auto mode

Multiple gear selection

Light instructions

Working current: 150A-200A

Support: Farad capacitor

Aircraft model high rate battery

Function introduction:

This circuit with 12V battery will become a storage spot welding machine for lithium battery, nickel-chromium battery and other nickel sheet welding, according to different configurations can be welded thickness of 0.1MM-0.15mm or so, we have customers A 0.2 mm thickness can be welded by replacing a thicker wire (10 square feet). After all, this device is for electronic enthusiasts, the frequency of use is not very high, so you can also use 0.1-0.15 solder 2 to replace thicker nickel.

Button function:

The button can switch modes. Each mode corresponds to different welding time. The LED corresponds to red/green/blue/white/yellow/powder/purple, 7 modes, the shortest red time and the largest purple welding time. Long press to set the waiting time, the default is 3 seconds, the maximum can be set to 10 seconds

Basic parameters :

– Supply voltage: 7V-12V (capacity X rate = must be greater than 150A)

– Current requirements: 150A or more instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good performance above 20A)

The 18650 battery and DC power cannot be used as a power supply. It must have a high rate RC battery or a car battery! ! !

Note:

Requires certain welding technology and circuit knowledge.

The parts received are parts, which need to be assembled by welding

Notice:

Capacitors must be welded or instant restart will cause MOS break down!!!

Note:Before welding , please do power on test first to make sure the board is in good condition .

Pay attention to the positive and negative poles when wiring.

Please do not use a 2-wire soldering tool .when using the 3wire iron, note that the

soldering iron must be grounded ,or there will be a risk to break though the Mos.

The mini capacitance should be welded on the PCB board as below picture showed.

1PCS X 12V Battery Energy Storage V3 Spot Welding Machine

( the Welding Machine soldered）

Brand Name	Readytosky
Origin	CN(Origin)
Material	Composite Material
Tool Supplies	Grinded
Upgrade Parts/Accessories	Frame
RC Parts & Accs	RC Aircraft Car
Use	Vehicles & Remote Control Toys
Quantity	1
Technical parameters	Value 3
Model Number	Energy Storage V3 Spot Welding Machine
Remote Control Peripherals/Devices	Battery
For Vehicle Type	Cars
Four-wheel Drive Attributes	Slot
Wheelbase	Bottom Plate

Reviews

There are no reviews yet.

DIY Portable 12V Battery Energ

Reviews

Be the first to review “DIY Portable 12V Battery Energ” Cancel reply

Related products

Login

Register